BS EN 10213-2007 Steel castings for pressure purposes
|
ID： |
2FB8C37B34A0465F964FC0570D77ABE6 |
|
文件大小(MB)： |
0.32 |
|
页数： |
30 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10213:2007,Steel castings for,pressure purposes,The European Standard EN 10213:2007 has the status of a,British Standard,ICS 77.140.30, , , ,Copyright British Standards Institution,Provided by IHS under license with BSI - Uncontrolled Copy,No reproduction or networking permitted without license from IHS Not for Resale,--`,,```,,,,````-`-`,,`,,`,`,,`---,BS EN 10213:2007,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 30 November 2007,. BSI 2007,ISBN 978 0 580 53568 0,National foreword,This British Standard is the UK implementation of EN 10213:2007. It,supersedes BS EN 10213-1:1996, BS EN 10213-2:1996, BS EN 10213-3:1996,and BS EN 10213-4:1996, which are withdrawn.,The UK participation in its preparation was entrusted to Technical Committee,ISE/6, Steel castings.,A list of organizations represented on this committee can be obtained on,request to its secretary.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard cannot confer immunity from,legal obligations.,Amendments issued since publication,Amd. No. Date Comments,Copyright British Standards Institution,Provided by IHS under license with BSI - Uncontrolled Copy,No reproduction or networking permitted without license from IHS Not for Resale,--`,,```,,,,````-`-`,,`,,`,`,,`---,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10213,November 2007,ICS 77.140.30 Supersedes EN 10213-1:1995, EN 10213-2:1995, EN,10213-3:1995, EN 10213-4:1995,English Version,Steel castings for pressure purposes,Pièces moulées en acier pour service sous pression Stahlguss für Druckbeh鋖ter,This European Standard was approved by CEN on 30 September 2007.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the CEN Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the,official versions.,CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2007 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10213:2007: E,Copyright British Standards Institution,Provided by IHS under license with BSI - Uncontrolled Copy,No reproduction or networking permitted without license from IHS Not for Resale,--`,,```,,,,````-`-`,,`,,`,`,,`---,EN 10213:2007 (E),2,Contents Page,Foreword.3,Introduction ..4,1 Scope..5,2 Normative references .5,■ 3 Terms and definitions 6,4 Information to be supplied by the purchaser .6,● 4.1 Mandatory information.6,■ 4.2 Optional information ..6,5 Designation .6,6 Manufacture.7,6.1 Manufacturing process .7,6.2 Welding operations.7,■ 6.3 Further processing .7,7 Requirements .7,■ 7.1 General7,7.2 Materials 7,■ 7.3 Casting8,●●7.4 Corrosion behaviour 10,8 Testing and documents on material testing .10,8.1 General.10,■ 8.2 Inspection and testing11,8.3 Test unit sampling .11,■ 8.4 Samples (test blocks).11,8.5 Test methods11,■ 8.6 Invalidation of tests ..11,■ 8.7 Retests .11,■ 8.8 Sorting and reprocessing .11,■ 9 Marking 12,■ 10 Packaging and surface protection ..12,■ 11 Complaints 12,12 Supplementary information.12,Annex A Welding conditions..21,Annex B (informative) Physical properties..23,Annex C (informative) Creep properties 25,Annex ZA (informative) Relationship between this European Standard and the Essential,Requirements of EU Directive 97/23/EC..27,Copyright British Standards Institution,Provided by IHS under license with BSI - Uncontrolled Copy,No reproduction or networking permitted without license from IHS Not for Resale,--`,,```,,,,````-`-`,,`,,`,`,,`---,EN 10213:2007 (E),……
……